Magma PCIHIF68 Uživatelský manuál stáhnout pdf (Strana 19)

Media 100 Conﬁgurations

Beige G3 Conﬁgurations

Both the G3 Minitower and the G3 Desktop models have been tested and are recommended. The

Beige G3 has 3 DIMM slots that support up to 768 MB with three 256 MB SDRAM (128-bit

wide) DIMMS, and 3 PCI slots plus a built-in video personality card. The Beige G3 has a much

faster PCI bus architecture than the previous 3-slot models. Therefore, it is capable of 300 KB and

can use Ultra SCSI and LVD controllers. We recommend the G3 systems conﬁgured with internal

ATA drive.

Beige G3 CPUs

■ G3/233

■ G3/266

■ G3/300 (see note below)

■ G3/333 (see note below)

NOTE The G3 with the Ultra SCSI drive ships with an ATTO SC Ultra SCSI controller. This controller takes a PCI

slot and does not support external devices. To use this model, you have to replace the single-channel

card with an ATTO UL2D dual-channel card, connect the internal system disk to one channel, and have

the second channel available for external drives.

Beige G3 Graphics Cards

■ ATI Xclaim

■ ATI Xclaim 3D (do not use in expansion chassis conﬁgurations)

■ ATI Nexus GA

Beige G3 SCSI Cards

■ Adaptec – use Remus 1.4 or Charismac 2.01g striping software

 2940U2W

 2940UW

 3940UW

■ ATTO Express – use ATTO Express Raid 1.2 or Charismac 2.01g striping software

 PCI DC

 PCI DCd (do not use in expansion chassis)

 PCI MCU (do not use in expansion chassis)

 PCI PSC

 PCI UL2D

 PCI UL2S (do not use in expansion chassis)

■ Hammer Storage JackHammer PCI Ultra SCSI DIFF DC – use ATTO Express Raid 1.2 or

Charismac 2.01g striping software

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 59 60

Žádné komentáře

Magma PCIHIF68 Uživatelský manuál Strana 19